SupTronics X1007 Dual SATA Expansion for Raspberry Pi 5
The SupTronics X1007 Dual SATA Expansion for Raspberry Pi 5 adds two 2.5" SATA 3.0 ports with up to 5Gbps speeds via PCIe. Mounts under the Pi 5 without blocking GPIO, powers via pogo pins, and supports mass storage setups.
Introducing the SupTronics X1007 Dual SATA Expansion, designed to provide a mass-capacity storage and high-speed storage solution via PCIe, for your Raspberry Pi 5. This board facilitates the simultaneous connection of two 2.5" HDDs/SSDs, with SATA 3.0 interface speeds reaching up to 5Gbps.
Note: does not currently support booting from SSD with the existing firmware.
The X1007 connects to the underside of the Raspberry Pi 5, eliminating the need for a passthrough for the GPIO. This means you can use your favourite HATs while also utilising this expansion board. The X1007 and your SSDs/HDDs can be powered from Raspberry Pi 5 via chunky pogo pins, using your single USB-C power supply for everything.
The X1007 serves as the perfect storage solution for establishing a home media centre or constructing a network-attached storage (NAS) system.
SSDs, Raspberry Pi and Active Cooler not included
Features
- Compatible with Raspberry Pi 5
- Supports the connection of two 2.5" HDD/SSD to your Raspberry Pi 5 simultaneously
- Supports up to 4TB + 4TB 2.5" SATA disk drives (HDDs/SSDs)
- Compliant with the Serial ATA 3.0 specification, with backward compatibility to SATA 2.0 and SATA 1.0
- Adheres to the PCI-Express v2.0 specification and is backward compatible with PCI-Express v1.0
- Supports communication speeds of 5.0 Gbit/s, 3.0 Gbit/s, and 1.5 Gbit/s
- Compatible with SATA 6G, 3G, and 1.5G hard drives
- LED indicators display power and drive status
- Powered from Raspberry Pi 5 via pogo pins
- Compatible with the Raspberry Pi Active Cooler
- Supports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down
The X1007 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware.
Specifications
| Power supply | 5Vdc ±5% ≥3A via FFC & pogo pins |
| Ports & connectors | PCIe connector ×1 – 16-pin pitch 0.5mm |
| SATA connectors ×2 – 7+15P | |
| PCIe FFC cable length | 37mm |
| PCB size | 164.5mm × 71.85mm |
Resources
Package Contents
- 1x SupTronics X1007 Dual SATA Expansion for Raspberry Pi 5
- 1x 37mm PCIe cable
- 1x Screw pack
SSDs, Raspberry Pi and Active Cooler not included
Original: $36.50
-65%$36.50
$12.77More Images
SupTronics X1007 Dual SATA Expansion for Raspberry Pi 5
The SupTronics X1007 Dual SATA Expansion for Raspberry Pi 5 adds two 2.5" SATA 3.0 ports with up to 5Gbps speeds via PCIe. Mounts under the Pi 5 without blocking GPIO, powers via pogo pins, and supports mass storage setups.
Introducing the SupTronics X1007 Dual SATA Expansion, designed to provide a mass-capacity storage and high-speed storage solution via PCIe, for your Raspberry Pi 5. This board facilitates the simultaneous connection of two 2.5" HDDs/SSDs, with SATA 3.0 interface speeds reaching up to 5Gbps.
Note: does not currently support booting from SSD with the existing firmware.
The X1007 connects to the underside of the Raspberry Pi 5, eliminating the need for a passthrough for the GPIO. This means you can use your favourite HATs while also utilising this expansion board. The X1007 and your SSDs/HDDs can be powered from Raspberry Pi 5 via chunky pogo pins, using your single USB-C power supply for everything.
The X1007 serves as the perfect storage solution for establishing a home media centre or constructing a network-attached storage (NAS) system.
SSDs, Raspberry Pi and Active Cooler not included
Features
- Compatible with Raspberry Pi 5
- Supports the connection of two 2.5" HDD/SSD to your Raspberry Pi 5 simultaneously
- Supports up to 4TB + 4TB 2.5" SATA disk drives (HDDs/SSDs)
- Compliant with the Serial ATA 3.0 specification, with backward compatibility to SATA 2.0 and SATA 1.0
- Adheres to the PCI-Express v2.0 specification and is backward compatible with PCI-Express v1.0
- Supports communication speeds of 5.0 Gbit/s, 3.0 Gbit/s, and 1.5 Gbit/s
- Compatible with SATA 6G, 3G, and 1.5G hard drives
- LED indicators display power and drive status
- Powered from Raspberry Pi 5 via pogo pins
- Compatible with the Raspberry Pi Active Cooler
- Supports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down
The X1007 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware.
Specifications
| Power supply | 5Vdc ±5% ≥3A via FFC & pogo pins |
| Ports & connectors | PCIe connector ×1 – 16-pin pitch 0.5mm |
| SATA connectors ×2 – 7+15P | |
| PCIe FFC cable length | 37mm |
| PCB size | 164.5mm × 71.85mm |
Resources
Package Contents
- 1x SupTronics X1007 Dual SATA Expansion for Raspberry Pi 5
- 1x 37mm PCIe cable
- 1x Screw pack
SSDs, Raspberry Pi and Active Cooler not included
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The SupTronics X1007 Dual SATA Expansion for Raspberry Pi 5 adds two 2.5" SATA 3.0 ports with up to 5Gbps speeds via PCIe. Mounts under the Pi 5 without blocking GPIO, powers via pogo pins, and supports mass storage setups.
Introducing the SupTronics X1007 Dual SATA Expansion, designed to provide a mass-capacity storage and high-speed storage solution via PCIe, for your Raspberry Pi 5. This board facilitates the simultaneous connection of two 2.5" HDDs/SSDs, with SATA 3.0 interface speeds reaching up to 5Gbps.
Note: does not currently support booting from SSD with the existing firmware.
The X1007 connects to the underside of the Raspberry Pi 5, eliminating the need for a passthrough for the GPIO. This means you can use your favourite HATs while also utilising this expansion board. The X1007 and your SSDs/HDDs can be powered from Raspberry Pi 5 via chunky pogo pins, using your single USB-C power supply for everything.
The X1007 serves as the perfect storage solution for establishing a home media centre or constructing a network-attached storage (NAS) system.
SSDs, Raspberry Pi and Active Cooler not included
Features
- Compatible with Raspberry Pi 5
- Supports the connection of two 2.5" HDD/SSD to your Raspberry Pi 5 simultaneously
- Supports up to 4TB + 4TB 2.5" SATA disk drives (HDDs/SSDs)
- Compliant with the Serial ATA 3.0 specification, with backward compatibility to SATA 2.0 and SATA 1.0
- Adheres to the PCI-Express v2.0 specification and is backward compatible with PCI-Express v1.0
- Supports communication speeds of 5.0 Gbit/s, 3.0 Gbit/s, and 1.5 Gbit/s
- Compatible with SATA 6G, 3G, and 1.5G hard drives
- LED indicators display power and drive status
- Powered from Raspberry Pi 5 via pogo pins
- Compatible with the Raspberry Pi Active Cooler
- Supports the HAT+ STANDBY power state, automatically turning off SATA devices when the Pi 5 is powered down
The X1007 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware.
Specifications
| Power supply | 5Vdc ±5% ≥3A via FFC & pogo pins |
| Ports & connectors | PCIe connector ×1 – 16-pin pitch 0.5mm |
| SATA connectors ×2 – 7+15P | |
| PCIe FFC cable length | 37mm |
| PCB size | 164.5mm × 71.85mm |
Resources
Package Contents
- 1x SupTronics X1007 Dual SATA Expansion for Raspberry Pi 5
- 1x 37mm PCIe cable
- 1x Screw pack
SSDs, Raspberry Pi and Active Cooler not included
