Power Supply for Raspberry Pi DigiAMP+ (19V 3.4A 65W)

Need a high-quality power brick to run your Raspberry Pi DigiAMP+? We've got one for you! This 65W Power Brick is able to offer a nice stable 19V @ 3.4A, so it's the AMP's perfect companion!

• Voltage - Output 19V
• Current - Output (Max) 3.4A
• Power (Watts) 65W
• Connector: Barrel Plug 2.5mm I.D. x 5.5mm O.D. x 11.0mm (Centre Positive)

Please note: This power brick does not come with an IEC cable. You will need to purchase one separately here (or "borrow" the one from your kettle) to use it!

Specification

• Input
  • IEC 320-C14 "Kettle" Lead (Not Included!)
  • Voltage: 90 - 264 VAC
  • Frequency: 47-63 Hz
  • Earth Leakage Current: <0.7mA at 240 VAC/50 Hz
• Output
  • Connector: Barrel Plug 2.5mm I.D. x 5.5mm O.D. x 11.0mm (Centre Positive)
  • Voltage: 19V
  • Current: 3.4A
  • Inital Set Accuracy: ±5% at 50% load
  • Minimum Load: No minimum load required
  • Hold Up Time: 8ms min at 115 VAC, full load
• General
  • Operating Temperature -10°C ~ 60°C
  • Efficiency: 88%
  • Energy Efficiency: Level V
  • Isolation: 3000 VAC Input to Output, 1500 VAC Input to Ground. Negative Output is connected to Ground.
  • Switching Frequency: 65 kHz ±10 kHz
• Environment
  • Operating Temperature: -10 deg C to +60 deg C derate linearly from 100% load at +40 deg C to 50% load at +60 deg C
  • Storage Temperature: -20 deg C to +85 deg C
  • Operating Humidity: 5% to 90% RH non-condensing
  • Storage Humidity: 5% to 95% RH non-condensing