ATOMS3 Dev Kit with 0.85" Display
The AtomS3 is a highly integrated programmable controller based on the ESP32-S3 main control, which includes the ESP32-S3 main control, integrated WiFi function, and an 8M on-chip FLASH.
The AtomS3 features a 0.85" IPS display, a programmable button function at the bottom of the screen, a built-in 5V to 3.3V circuit, a 6-axis gyro sensor MPU6886, an on-board Type-C interface, a power supply port, one HY2.0 4-pin expansion port, 6 GPIOs and power pins reserved at the bottom to enable expansion applications.
It measures 24 x 24mm, which is suitable for various embedded smart device applications.
Note: If you need to burn the firmware, please press and hold the reset button (about 2 seconds) until the internal green LED lights up, and then you can release it. At this time the device has entered download mode.
Features
- Developed based on ESP32-S3FN8
- Comes with a USB download function
- Built-in 3-axis gyroscope and 3-axis accelerometer (MPU6886)
- Programmable keys
- 0.85 inch LCD screen
- Infrared emission function
- Expandable pins and interfaces
- Development platform: Arduino, UIFlow
Specifications
| Resources | Parameters |
| MCU | ESP32-S3FN8 |
| DCDC | SY8089 |
| IMU | MPU6886 |
| LCD | N085-1212TBWIG06-C08 |
| Operating temperature | 0°C ~ 40°C |
| Resolution | 128(H)RGB x 128(V) |
| support voltage | 5V |
| Power supply mode | TYPE C |
| output voltage | 3.3V |
| IO interface × 6 | G5/G6/G7/G8/G38G39 |
| Screen communication protocol | SPI |
| Product Size | 24mm × 24mm × 13mm |
| Package Size | 65mm × 44.5mm × 14mm |
| Product Weight | 6.8g |
| Package Weight | 10.9g |
Resources
Pinout
Package Contents
- 1x AtomS3
More Images
ATOMS3 Dev Kit with 0.85" Display
The AtomS3 is a highly integrated programmable controller based on the ESP32-S3 main control, which includes the ESP32-S3 main control, integrated WiFi function, and an 8M on-chip FLASH.
The AtomS3 features a 0.85" IPS display, a programmable button function at the bottom of the screen, a built-in 5V to 3.3V circuit, a 6-axis gyro sensor MPU6886, an on-board Type-C interface, a power supply port, one HY2.0 4-pin expansion port, 6 GPIOs and power pins reserved at the bottom to enable expansion applications.
It measures 24 x 24mm, which is suitable for various embedded smart device applications.
Note: If you need to burn the firmware, please press and hold the reset button (about 2 seconds) until the internal green LED lights up, and then you can release it. At this time the device has entered download mode.
Features
- Developed based on ESP32-S3FN8
- Comes with a USB download function
- Built-in 3-axis gyroscope and 3-axis accelerometer (MPU6886)
- Programmable keys
- 0.85 inch LCD screen
- Infrared emission function
- Expandable pins and interfaces
- Development platform: Arduino, UIFlow
Specifications
| Resources | Parameters |
| MCU | ESP32-S3FN8 |
| DCDC | SY8089 |
| IMU | MPU6886 |
| LCD | N085-1212TBWIG06-C08 |
| Operating temperature | 0°C ~ 40°C |
| Resolution | 128(H)RGB x 128(V) |
| support voltage | 5V |
| Power supply mode | TYPE C |
| output voltage | 3.3V |
| IO interface × 6 | G5/G6/G7/G8/G38G39 |
| Screen communication protocol | SPI |
| Product Size | 24mm × 24mm × 13mm |
| Package Size | 65mm × 44.5mm × 14mm |
| Product Weight | 6.8g |
| Package Weight | 10.9g |
Resources
Pinout
Package Contents
- 1x AtomS3
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The AtomS3 is a highly integrated programmable controller based on the ESP32-S3 main control, which includes the ESP32-S3 main control, integrated WiFi function, and an 8M on-chip FLASH.
The AtomS3 features a 0.85" IPS display, a programmable button function at the bottom of the screen, a built-in 5V to 3.3V circuit, a 6-axis gyro sensor MPU6886, an on-board Type-C interface, a power supply port, one HY2.0 4-pin expansion port, 6 GPIOs and power pins reserved at the bottom to enable expansion applications.
It measures 24 x 24mm, which is suitable for various embedded smart device applications.
Note: If you need to burn the firmware, please press and hold the reset button (about 2 seconds) until the internal green LED lights up, and then you can release it. At this time the device has entered download mode.
Features
- Developed based on ESP32-S3FN8
- Comes with a USB download function
- Built-in 3-axis gyroscope and 3-axis accelerometer (MPU6886)
- Programmable keys
- 0.85 inch LCD screen
- Infrared emission function
- Expandable pins and interfaces
- Development platform: Arduino, UIFlow
Specifications
| Resources | Parameters |
| MCU | ESP32-S3FN8 |
| DCDC | SY8089 |
| IMU | MPU6886 |
| LCD | N085-1212TBWIG06-C08 |
| Operating temperature | 0°C ~ 40°C |
| Resolution | 128(H)RGB x 128(V) |
| support voltage | 5V |
| Power supply mode | TYPE C |
| output voltage | 3.3V |
| IO interface × 6 | G5/G6/G7/G8/G38G39 |
| Screen communication protocol | SPI |
| Product Size | 24mm × 24mm × 13mm |
| Package Size | 65mm × 44.5mm × 14mm |
| Product Weight | 6.8g |
| Package Weight | 10.9g |
Resources
Pinout
Package Contents
- 1x AtomS3
