ADXL335 - 5V ready triple-axis accelerometer (+-3g analogue out)
We've updated our favourite triple-axis accelerometer to now have an onboard 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the Arduino. This breakout comes with 3 analogue outputs for X, Y and Z axis measurements on a 0.75"x0.75" breakout board. The ADXL335 is the latest and greatest from analogue devices, known for its exceptional quality MEMS devices. The VCC takes up to 5V in and regulates it to 3.3V with an output pin. The analogue outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.
Fully assembled and tested. Comes with an 8-pin 0.1" standard header in case you want to use it with a breadboard or perfboard. Two 2mm (0.08") mounting holes for easy attachment.
The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth
Revision History
- As of August 2024 – we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.
Specifications
Dimensions (without header)
- Length: 19mm
- Width: 19mm
- Height: 3.14mm
- Weight: 1.27g
Resources
More Images
ADXL335 - 5V ready triple-axis accelerometer (+-3g analogue out)
We've updated our favourite triple-axis accelerometer to now have an onboard 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the Arduino. This breakout comes with 3 analogue outputs for X, Y and Z axis measurements on a 0.75"x0.75" breakout board. The ADXL335 is the latest and greatest from analogue devices, known for its exceptional quality MEMS devices. The VCC takes up to 5V in and regulates it to 3.3V with an output pin. The analogue outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.
Fully assembled and tested. Comes with an 8-pin 0.1" standard header in case you want to use it with a breadboard or perfboard. Two 2mm (0.08") mounting holes for easy attachment.
The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth
Revision History
- As of August 2024 – we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.
Specifications
Dimensions (without header)
- Length: 19mm
- Width: 19mm
- Height: 3.14mm
- Weight: 1.27g
Resources
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
We've updated our favourite triple-axis accelerometer to now have an onboard 3.3V regulator - making it a perfect choice for interfacing with a 5V microcontroller such as the Arduino. This breakout comes with 3 analogue outputs for X, Y and Z axis measurements on a 0.75"x0.75" breakout board. The ADXL335 is the latest and greatest from analogue devices, known for its exceptional quality MEMS devices. The VCC takes up to 5V in and regulates it to 3.3V with an output pin. The analogue outputs are ratiometric: that means that 0g measurement output is always at half of the 3.3V output (1.65V), -3g is at 0v and 3g is at 3.3V with full scaling in between.
Fully assembled and tested. Comes with an 8-pin 0.1" standard header in case you want to use it with a breadboard or perfboard. Two 2mm (0.08") mounting holes for easy attachment.
The XYZ filter capacitors are 0.1uF for a 50 Hz bandwidth
Revision History
- As of August 2024 – we've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.
Specifications
Dimensions (without header)
- Length: 19mm
- Width: 19mm
- Height: 3.14mm
- Weight: 1.27g
