1.8" LCD display Module (128x160)
HomeStore

1.8" LCD display Module (128x160)

1.8" LCD display Module (128x160)

Looking for a small, full-colour, display for your next project? This little 1.8-inch general-purpose LCD display module, features a resolution of 128x160 pixels, with an embedded controller, and communication via SPI. This is an ideal display for your next Arduino, Adafruit HUZZAH, or Raspberry Pi project. 

Features

  • SPI interface requires minimum GPIO for controlling
  • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications

  • Driver: ST7735S
  • Interface: SPI
  • Display color: RGB, 65K color
  • Resolution: 128x160
  • Backlight: LED
  • Operating voltage: 3.3V

        Resources

        Package Contents

        • 1x 1.8" LCD Module
        • 1x PH2.0 20cm 8-Pin

        Dimensions

        Interface 

        • VCC: Power (3.3V input)
        • GND: Ground
        • DIN: SPI data input
        • CLK: SPI clock input
        • CS: Chip selection, low active
        • DC: Data/Command selection (high for data, low for command)
        • RST: Reset, low active
        • BL: Backlight
        $3.04

        Original: $8.70

        -65%
        1.8" LCD display Module (128x160)—

        $8.70

        $3.04

        More Images

        1.8" LCD display Module (128x160) - Image 2
        1.8" LCD display Module (128x160) - Image 3

        1.8" LCD display Module (128x160)

        Looking for a small, full-colour, display for your next project? This little 1.8-inch general-purpose LCD display module, features a resolution of 128x160 pixels, with an embedded controller, and communication via SPI. This is an ideal display for your next Arduino, Adafruit HUZZAH, or Raspberry Pi project. 

        Features

        • SPI interface requires minimum GPIO for controlling
        • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

        Specifications

        • Driver: ST7735S
        • Interface: SPI
        • Display color: RGB, 65K color
        • Resolution: 128x160
        • Backlight: LED
        • Operating voltage: 3.3V

              Resources

              Package Contents

              • 1x 1.8" LCD Module
              • 1x PH2.0 20cm 8-Pin

              Dimensions

              Interface 

              • VCC: Power (3.3V input)
              • GND: Ground
              • DIN: SPI data input
              • CLK: SPI clock input
              • CS: Chip selection, low active
              • DC: Data/Command selection (high for data, low for command)
              • RST: Reset, low active
              • BL: Backlight

              Product Information

              Shipping & Returns

              Description

              Looking for a small, full-colour, display for your next project? This little 1.8-inch general-purpose LCD display module, features a resolution of 128x160 pixels, with an embedded controller, and communication via SPI. This is an ideal display for your next Arduino, Adafruit HUZZAH, or Raspberry Pi project. 

              Features

              • SPI interface requires minimum GPIO for controlling
              • Comes with development resources and manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

              Specifications

              • Driver: ST7735S
              • Interface: SPI
              • Display color: RGB, 65K color
              • Resolution: 128x160
              • Backlight: LED
              • Operating voltage: 3.3V

                    Resources

                    Package Contents

                    • 1x 1.8" LCD Module
                    • 1x PH2.0 20cm 8-Pin

                    Dimensions

                    Interface 

                    • VCC: Power (3.3V input)
                    • GND: Ground
                    • DIN: SPI data input
                    • CLK: SPI clock input
                    • CS: Chip selection, low active
                    • DC: Data/Command selection (high for data, low for command)
                    • RST: Reset, low active
                    • BL: Backlight
                    1.8" LCD display Module (128x160) | The Ultimate Raspberry Pi & Maker Store